• Are you looking for a coupon code to buy my software? You can get one from lots of 3rd party sites but they won't work. My software never goes on sale and has never been discounted. The only coupon codes that are given is when I give a club presentation and I offer a discount to the attendees. Other than that, everyone pays the same price.

Search results

  1. rtaylor

    Indian Blanket sawing

    I have a question about ripping the narrow (1/8) strips from the chevron when constructing the Indian Blanket feature segments. in order to get the cleanest kerf free slices. I have tried both setting the fence at 1/8" and using a Microjig push block with a 1/16 attachment. I have also used a...
  2. rtaylor

    Line Laser

    Has anyone incorporated a line laser with their saw into 2nd and 3rd generation cutting using LamPro? What do you do? Thinking about trying one.
  3. rtaylor

    Woodturner Pro

    Has anyone had issues with the calculations being inaccurate for segment rings using Woodturner Pro? I am having real issues. I am using 1/16 accuracy. My ring is 16 segments. Board width 7/8", segment edge length 1", Inside edge 5/8". all dimensions are spot on. Using a wedgie sled so the ring...
  4. rtaylor

    Row Thickness

    Is there a way to change individual row thickness in Segment Pro, or are do they all need to be the same? I want to do a feature ring that is painted. Thinner rings allow more detail to paint. Maybe this is coming in a later version. I am not seeing any way to adjust individual row thickness...
  5. rtaylor

    glueing thin rings

    What is the best way to glue thin rings together and keep them flat? For thicker rings I use blue tape and then clamp with a band clamp then drum sand them flat. I am having trouble with the thinner rings. My feature ring needs to have about 10 rows of 1/8 inch thick rings. They are stacked and...
  6. rtaylor

    Feature ring construction

    I need some advice on construction of, and, cutting segments for a feature ring. Although I have done this lamination before, I think I am making it more difficult than it needs to be so I thought I would ask how some of you do it. I use a Dubby sled for cutting segments and have found it to be...
  7. rtaylor

    Lamination Pro

    After uploading and installing the new version 3 I am not seeing the saw kerf tool in the tool bar. I also do not get to set my clipping region, nothing shown there. These features are shown in the software help files???? I am running windows 10. Any help would be appreciated.
  8. rtaylor

    Cutting first generation lamination question..

    Why is it necessary to cut through the middle of the lamination on this type of design? The repeating unit is 2 strips and it is one generation. Would it not be easier to just cut them apart on the glue line? Is the program showing this as though it is going to go another generation or is it...
  9. rtaylor

    curve and anchor points

    Why cant I toggle between curve and anchor points on the samples provided in the documents folder. I can select a point and toggle it to anchor but not back again???
  10. rtaylor

    Feature Ring

    Is it possible to design something like this in Lamination Pro?
  11. rtaylor

    First vase with a 2nd generation design

    Lloyd, here is my attempt at your tutorial vase. The second generation is less than perfect but I learned a lot. Thanks for your help
  12. rtaylor

    wedges between segments

    How are wedges put in between segments in woodturner pro? Or can it be done? I want to add some vertical wedges of dark wood between segments on a feature ring shown in the example below.
  13. rtaylor

    2nd generation saw cuts

    I just finished up a vase with a 2nd generation feature ring. I had real difficulty making those centerline cuts. I found that the laser method is really not accurate enough unless the laser set up is plumb with the saw top. If it is not perpendicular to the saw table, but at a slight angle...
  14. rtaylor

    Turning the inside of a spouted vase

    I have to ask this question because I am a rookie at this. I am working on a vessel that has a very narrow opening at the top. First of all I have 2 feature rings that are 1.5 inches tall and made out of 3/4 inch material that are stave cut, by the time that they are turned the wall thickness is...
  15. rtaylor

    Necked vases question...

    When glueing up rings for a vase that has a spherical or egg shaped bottom and then transitions into a narrow neck with a flair at the top which way should it be done? Should you glue the rings all the way to the top or, make the neck part separate, and then cut a mortise in the previous ring to...
  16. rtaylor

    My Stomper set up

    This is my stomper station with the laser attached. So far I am getting pretty good results with accurate line up. I am ready to start on my 3rd vase and enjoying segmented turning a lot! RTaylor
  17. rtaylor

    Lamination Pro question

    When making the second generation cuts Lamination Pro shows to make the cuts at the intersection of the blue lines. I can not figure out how to determine where this intersection is. The horizontal line is the center line of the lamination but I am confused about the kerf line.:confused: If...
  18. rtaylor

    Woodturner Pro

    In the Woodturner Pro ring view, what does the miter angle shown in the chart refer to? It does not match the calculations or segment view miter angle. It shows a decimal miter angle. ex. 6 segments shows .52 degrees, 12 segments shows .26 degrees?? Just curious. RTaylor
  19. rtaylor

    Cutting narrow laminate strips......

    What method do you use when you rip strips for lets say the southwest design? I use the gripper for running stock on my saw but 1/8 inch is pretty narrow between the blade and the fence. The 1/8 shoe is the thinnest one made for the gripper anyway and it would still hit the blade while pushing...
  20. rtaylor

    Southwest pattern for feature ring

    I have a couple of questions about the southwest pattern. I have decided to make the feature ring first for my next vessel. I am now ready to make the saw rips from the first generation chevron. Once that is complete a sandwitch glueing will complete the design. Once it is drum sanded it will be...
Back
Top