This is a take off of a bowl made from rings by Dennis Edwards with a segmented ring top. I like sw designs. The ring blank was made up of walnut, maple, zebra wood, bloodwood, chakte-kok. 2 8x8x4" blanks were made. the blanks were then cut into 1/8 thick slabs. I designed the bowl using WTP. I exported the cut summary to excel. In excel I could determine how many rings per slab I could achive. Some slabs I could cut 3 rings. Some I could only get 1.
Each ring was off set about 1/8 inch , keying on the two slim maple stips next to the center maple piece.
Each ring was off set about 1/8 inch , keying on the two slim maple stips next to the center maple piece.