/ Register

stuart johnson
Last Activity:
Oct 3, 2018
Joined:
Sep 9, 2012
Messages:
434
Likes Received:
42
Trophy Points:
28
Media:
3

Followers 3

  1. Bill Renfro
  2. William Prickett
  3. mfisher
Gender:
Male
Birthday:
Sep 14, 1942 (Age: 77)
Occupation:
Retired Trust Systems

Share This Page

stuart johnson

Super Moderator, Male, 77

Staff Member

I would use 1/2 inch. Do it a second time and set it at 3/8 to see if there is any real difference. Aug 29, 2018

stuart johnson was last seen:
Oct 3, 2018
    1. Woodsmith
      Woodsmith
      have some oak that's 1/2 thick but naturally it is 7/16 thick. My question is do I set the segmented pro at a thickness of 0.5 or 0.375 ? Thank you in advance. Bob
      Aug 29, 2018
    2. stuart johnson
      stuart johnson
      I would use 1/2 inch. Do it a second time and set it at 3/8 to see if there is any real difference.
      Aug 29, 2018
    3. Woodsmith
      Woodsmith
      I have some oak that's 1/2 thick but naturally it is 7/16 thick. My question is do I set the segmented pro at a thickness of 0.5 or 0.375 ? Thank you in advance. Bob
      Aug 29, 2018
      2. mfisher
        mfisher
        Woodsmith. Don't confuse wood thickness of your stock with what you use in the software. The SP ring thickness would be what you want the final thickness of the rings to be for your vessel.
        Sep 5, 2018
    4. Woodsmith
      Woodsmith
      Hello Stuart. Can I ask a question?
      Aug 29, 2018
  • Loading...
  • Loading...

  • About

    Gender:
    Male
    Birthday:
    Sep 14, 1942 (Age: 77)
    Occupation:
    Retired Trust Systems
    I started off my woodworking in 1998 with some beginner handtool courses. These ranged from simple dovetailed boxes to craftsman style rocking chair. Somewhere along the line I got interested in woodturning but know where to find decent green wood. I started following woodturning on the old REC group and finally found segmented turning. I now spend half my shop time turning, half my time doing flat work and what seems like another half cleaning up so I can find my tools. I have no set agenda and being retired I work on whatever I want. This means I have a lot of unfinished project and I have been known to stick a piece of wood on the lathe and turn it into a toothpick just for fun.

    Interact

    Content:
  • Loading...