Open Segment Project - Maze

Discussion in 'Follow Along Projects' started by Bob Beaupre, Apr 12, 2017.

  1. Bob Beaupre

    Bob Beaupre Super Moderator Staff Member

    So row 12 is now no. This is where my board width goes from 1.0" down to 0.75".
    So when I flattened row 12 I did some turning on the inside to clean it up
    12-2.jpg
     
    Last edited: May 6, 2017
  2. Glenn McCarron

    Glenn McCarron PRO Member

    Moving along now. Hard to believe your already over 1000 pieces.
     
  3. Bob Beaupre

    Bob Beaupre Super Moderator Staff Member

    Well spring has gotten in my way and have not gotten as much done on the project as I've wanted to get done. But we finished gluing on row 16 just now so I thought I'd post.
    .
    16.jpg
     
  4. Glenn McCarron

    Glenn McCarron PRO Member

    Looking good Bob. I'm having the same issue with spring
     
  5. Bob Beaupre

    Bob Beaupre Super Moderator Staff Member

    Well got into the shop this morning before I had to go out and cut the grass.
    Did some clean up on the ID and the OD before putting on row 17
    16-1.jpg 16-2.jpg
    Row 17 now on
    17.jpg
     
  6. Bob Beaupre

    Bob Beaupre Super Moderator Staff Member

    Well it's time to get to my project, most of the summer stuff is complete.

    Just finished gluing on row #19
    IMG_20170913_142432389.jpg IMG_20170913_142659498.jpg
     
  7. Glenn McCarron

    Glenn McCarron PRO Member

    Looking forward to the continued follow along. Kinda nice to have that summer work done but to bad summer is all but done as well! I like fall the best anyway.
     
  8. Bob Beaupre

    Bob Beaupre Super Moderator Staff Member

    Fall is my favorite, also.
     
  9. bigfoot53

    bigfoot53 PRO Member

    Looking Great Bob,
     
  10. Bob Beaupre

    Bob Beaupre Super Moderator Staff Member

    Row 24 is now on.
    IMG_20171004_150824810.jpg

    IMG_20171004_150841479.jpg
     
  11. Glenn McCarron

    Glenn McCarron PRO Member

    Your pattern is really pulling together now, awesome job!
     
  12. Bob Beaupre

    Bob Beaupre Super Moderator Staff Member

    28 rows on need to be done by the end of the month, big push on now.
    IMG_20171110_212657125.jpg IMG_20171110_212705106.jpg
     
  13. mfisher

    mfisher Super Moderator Staff Member

    Looking very good.
     
  14. Glenn McCarron

    Glenn McCarron PRO Member

    So cool to watch the assembly as the pattern and colours continue to emerge. Nice looking project.
     
  15. Bob Beaupre

    Bob Beaupre Super Moderator Staff Member

    Well after a set back on Sunday, I was having some issues with my fixture. I finally did what I should have done in the beginning. I swapped out the bronze bushings in my spindle attachment and now are running with bearings. Turns much smoother and is ROCK solid now.

    We are now at row 40, 3,745 pieces.

    IMG_20171116_150922044.jpg IMG_20171116_150936445.jpg
     
  16. Glenn McCarron

    Glenn McCarron PRO Member

    Looking awesome Bob. That's a lot of pieces.
     
  17. Bob Beaupre

    Bob Beaupre Super Moderator Staff Member

    Looks like you are going to find out with your vase.
     
  18. Bob Beaupre

    Bob Beaupre Super Moderator Staff Member

    50 rows and a little turning

    IMG_20171119_140650131.jpg IMG_20171119_140700772.jpg
     
  19. Glenn McCarron

    Glenn McCarron PRO Member

Share This Page