 | Everything: Segment PRO, Lamination PRO, Woodturner PRO & FREE 3D Design PRO (Save $98!) WTP-101 Price: 139.00 Segment PRO, Lamination PRO, Woodturner PRO & FREE 3D Design PRO - $237 if bought separately. Save $98!.
| Buy Now |
|
| Suite: Segment PRO & Lamination PRO (Save $49!) WTP-102 Price: 109.00 Segment PRO and Lamination PRO.- $158 if bought separately - Save $49
| Buy Now |
 | Suite: Woodturner PRO/3D Design PRO & Lamination PRO (Save $49!) WTP-0014 Price: 109.00 IMPORTANT: THIS CODE WILL NOT UNLOCK THE NEW SEGMENT PRO WHICH IS A DIFFERENT PRODUCT.
| Buy Now |
|
| Lamination PRO ONLY WTP-0016 Price: 79.00 Lamination PRO ONLY - this purchase does not include 3D Design PRO or Woodturner PRO. | Buy Now |
|
| Segment PRO WTP-103 Price: 79.00 Segment PRO (authorization code will be emailed within 24 hours)
| Buy Now |
 | Woodturner PRO with free 3D Design PRO WTP-0015 Price: 79.00 IMPORTANT: THIS CODE WILL NOT UNLOCK THE NEW SEGMENT PRO WHICH IS A DIFFERENT PRODUCT. | Buy Now |
|
| One Hour Screen Sharing Training Price: 50.00 A trained expert will work with you over the phone while using screen sharing technology. Training can be purchased separately either before or after purchase of software.
| Buy Now |
|
| Retrieve Lost Authorization code with a Software Backup Flash Drive Price: 15.00 You will receive a Flash Drive that has the latest versions of all software installers and an email containing your Authorization Code(s). Also contains a Content folder with projects, tips & tricks and...
| Buy Now |
Create vessels using solid disks, closed segments, open segments, staves, compound segments, veneer rings and even spoke and wheel configuarions.
Once you transfer your wall profile from 3D Design PRO to Woodturner PRO, you can click the ProfileSNAP button and all inside and outside diameters will immediately SNAP to the wall profile.
Use the overlay to see height versus width Fibonacci ratios. Use major Golden Section lines to see where to position the feature ring. Use minor lines to determine how wide the mouth and base of a vessel should be relative to the overall width.
Visualize the complete design, including a feature ring created in Lamination PRO.
Once you identify the rings that are to be part of the selection, you can change all the details of the selected rings at the same time.
Before painting segments, tell the software how many times per row the painting is to be repeated.
The Vessel View shows all segments painted with species of your choice. Dozens of species are included and you can add your own by simply copying image files into a folder. This view allows you to rotate the vessel to the left, right or continuous rotation. |
The C |
The Ring View is a full-size image of the currently selected row. It shows segment numbers and is painted with a color that closely resembles the species. When printed, this page also has all the cutting details and instructions for creating the ring. This view is particularly helpful in placing the various segments in their proper location. |
The Summary View is a printout of the entire vessel which includes a single line for each row. This printout shows pertinent details for creating each row. You will typically print this view to take to the shop when you're ready to create the vessel. |
The Segment View shows one segment in detail from the currently selected row. |
The Golden Ration overlay gives you the ability to make design decision based on the Golden Ratio. For example, you might use the ratio to determine where to center a feature ring or how wide a vessel might be based on the height. It has both major and minor ratio indicators. |
The Glue Line overlay simly shows you the width of the surface areas between two adjacent rings. This is a fast way of knowing if you current design has enough glue surface area to keep a vessel intact. |
The Wall Profile overlay is a visual representation of the area that is available for your wall profile. If portions of the hash overlay turn from green to red, it means that there is a problem with how two adjacent rows have been created. |
| Software > 3D Design PRO | Software > Lamination PRO |
