Ossie Pereira
PRO Member
I have a 20" long laminated strip with the diamond pattern.
My repeating unit says 2". I have 1/8" kerf in the option screen.
My Question is should i cut at the 2' mark and if
so, has the program calculated for the kerf if not, do i have add an extra 1/6 or 1/8 to the width of my chevron pattern in order to accommodate my saw kerf of 1/8".
Please advise as i have tried to get an answer in the forum section but could not find it.
Also what type of jig is most suitable for this application or do i have to use the laser method?
Thanks
My repeating unit says 2". I have 1/8" kerf in the option screen.
My Question is should i cut at the 2' mark and if
so, has the program calculated for the kerf if not, do i have add an extra 1/6 or 1/8 to the width of my chevron pattern in order to accommodate my saw kerf of 1/8".
Please advise as i have tried to get an answer in the forum section but could not find it.
Also what type of jig is most suitable for this application or do i have to use the laser method?
Thanks