Search results

The laminate is symmetric. The Generation 3 is not.

I find it invaluable to be able to vary cutting angles in the left hand panel and see the effect immediately on subsequent generations. I'd like to be able to do this, too, with strip widths. Can you add the capability to the left hand panel so that we can also change the strip widths and see...

Well, it's more than a pixel or scan line. (I'm having trouble uploading another image) If I start with the .lam file and increase the Gen 1 cut angle incrementally up to say 60 degrees and watch the Gen 2 image, the Gen 2 pattern is far from symmetrical top to bottom; yes, the central feature...

Sometimes it's hard to tell if a small black region of the laminate is actually wood (e.g. ebony) or just a convergence of black element outlines or is a void. If we could change the background color from black to another of our choice that is not a wood color (e.g. hot pink) we could tell if...

For the attached file which has a symmetric laminate, the Gen 2 laminate seems reasonable (symmetric above and below the horizontal centerline) up to a Gen 1 cut angle of 38 degrees. But when increasing the Gen 1 cutting angle above 38 degrees and while looking at the Gen 2 laminate, the...

I have Lamination Pro; would like to download and install the latest version. I want to know whether my authorization code covers the new version or will I just stomp on my existing version and have to purchase a new license.