New profile posts

Just bought the software bundle. Have been turning for about 5 years doing mostly segmented and open segmented turning. just got a new lathe last week, Rikon 70-3040. Waited 8.5 months for delivery.
Microsoft doesn't support paint anymore, i'm wondering if the paintview can be printed without having MSpaint installed.
I guess my memory lets me down on how to print the coloured paint, any help would be nice
Hi

I was wondering if you every upgraded segmented pro to change properties of individual rows
mfisher
mfisher
No. SP has not been upgraded to change properties of individual rows. SP is rules based design tool. If you want full property control of individual rings then Wood Turner Pro would be the design tool to use.
Are you still online? I can't open the tutorial for segmented pro. It brings me to woodturner pro forums but there are no forums.
where are all of the video tutorials?
mfisher
mfisher
Look under video tutorials / software.
If you have questions regarding the software, please ask questions in the other forums.
Hi Mike,
Heading for Mesa early Wednesday morning will be there Friday afternoon.
We are planning on being there for about 6 months, hope to see you this trip down.
Bob
mfisher
mfisher
Hi Bob.
We will have to keep in touch. Right now the shop is open but no guests. Covid protocols are still in place. I have not been in the shop since the shop closed. Still keeping isolated.
Bob Beaupre
Bob Beaupre
About the same here. We arrived on Friday at about 5:00 PM. Have not seen anyone at our woodshop yet. No guests allowed here either
I am a member of the Mandurah Group and a member of the Segmenters Mob, which is a sub group made up of members from all of the groups in Western Australia under the overarching agency called the West Australian Woodturners Association (WAWA). We have regular demonstrations on all the softwares available but are really getting stuck into Segment Pro, helping all those who are new to our craft.
what is the dia. of the bowl you use for your picture? yes I'm new to this forum. thanks in advance Brian
Jeff Miller
Jeff Miller
I think it was about 12 inches. I no longer have that piece in my possession.
Got my validation code today..... now where to start???
looking for tutorials on how to use the programs
mfisher
mfisher
Check out the Tutorial section. Some good videos.
Also you can do a Search for WTP or SP vids.
Just updated Lamination pro and Woodturner pro also Installed segment pro. I have got to say I’m pretty excited to get going on designing new segmented projects. Being on lockdown for COVID 19 I have a lot of time to learn these softwares. I don’t think I will get bored.
I don't know why anyone would want to try to duplicate the overly-complicated accu-wedge bandsaw jig.

Just make a two-fence sled that is similar to what Jerry Bennett shows on his segmentology videos. The zero-clearance fence" that attaches to the table saw insert will have to be integral with the band saw sled version. You will need to make or buy some angle plates to set your fence angle precisely.
Hi John
I do not get around much my wife does the driving since the bombing due to meds and brain damage. I was going to ask Ed if he would donate some pen kits and other turning stuff like S&P shakers and key chains but forgot. When I have any funds left over I buy what I can since I supply them with everything.

Hope we can be friends.

My email is papaaeastman@gmail.com
I noticed the title under my avatar still says 'New Member' eveb though I joined in early 2018. I was curious about what I have to do to qualify for an upgraded title. 'Green Apprentice", perhaps. :) It's not a big thing but I was curious.

Ken
Lloyd Johnson
Lloyd Johnson
Hi Ken,

Changing the Membership to PRO Member is something I do manually. When a purchase is made, look for an account and then upgrade it. On yours, it appears that since your wife made the purchase and it had her name and email address on it, I made an account for her. I have now deleted it and have upgraded the account you made.
Arlin this was a solid Oak bowl that I turned and it warped very badly so I then cut it up into segments and produced this bowl so I dont really know the angle of the stays. Hope this is of some help to you
Glenn

I could use any and all help and advise on making a board vase. My email is Papaaeastman@gmail.com. Pictures and good explanation really helps me and the vets a lot. Besides the broken body I also have brain damage from the bombing in the middle east so it takes awhile for things to sink in and like I said pictures or play by play or even video are a great help.

Thanks buddy
Arlin
Glenn McCarron
Glenn McCarron
Hello Arlin. I will review my thread over the next few days and see if there is anything else I could add. I know I do not have any video. If there are specific questions you have please don't hesitate to ask. I also just got home from spending a week in the hospital and will still be under treatment for the next few weeks for an abscess in the lower bowel. Glenn
Top