Ken Sherwin
PRO Member
I was asked to create a step-by-step set of instructions to help bring somebody familiar with saws and lathes up to speed with segmenting. The attached document was the result. I hope you find it useful.
-
Having problems with video with Segment PRO on a new PC? You could be experiencing one (or both) of two problems. First, if you have an ultra high-resolution screen, the recommended settings might be higher than 1920 x 1080 with a scale factor of more than 100% and the user interfaces for all software written in c# will NOT be correct. Simply change the resolution and scaling to 1920 x 1080 and scale to 100%. Second, if you have a wonky Bowl View, you have an Intel Iris graphics solution and there are serious problems with it. Solution - go to the Drivers page at Intel's website and install their latest driver for your computer. This will fix it. Link: https://www.intel.com/content/www/us/en/download-center/home.html
Steps to produce a basic segmented vase
- Thread starter Ken Sherwin
- Start date
Thanks Ken, good information. This will be great for new people to segmenting.
jwmadzelan
PRO Member
great presentation. Thank you
A
Arlin Eastman
Guest
Thank you for doing it for me Ken you did a great job.