Layout of the rings

[JonathanKlein]

Is there something that shows the distance between each ring to aid in glue-up? In the main imagine of the bowl it does show a layout but there is nothing obvious to me that is showing how far each ring should be from the previous as a glue-up guide to help - or just visually center the ring is the best approach. Maybe this could be an enhancement that give a measurement so that a layout line could be drawn to aid. Thanks

 

[mfisher]

There are a variety of options to centering the rings. A general search on the web will provide links to different methods for centering the rings.
It would not be difficult for someone to export the summary sheet. Take the OD from the upper ring and subtract the OD of the lower rings and divide by 2. that would give you the gap between the two rings. I have used a caliper and set that distance. Using the caliper as a guide you can center the ring.

Here is a general search

how to center segmented rings for a bowl - Google Search

You can use the Stomper, use calipers, or a variety of other methods.

 

[JonathanKlein]

There are a variety of options to centering the rings. A general search on the web will provide links to different methods for centering the rings.
It would not be difficult for someone to export the summary sheet. Take the OD from the upper ring and subtract the OD of the lower rings and divide by 2. that would give you the gap between the two rings. I have used a caliper and set that distance. Using the caliper as a guide you can center the ring.

Here is a general search

how to center segmented rings for a bowl - Google Search

You can use the Stomper, use calipers, or a variety of other methods.

fair enough but it would seem very simple for the software to provide the distance for you already. just a suggestion and yes i can export to excel and add such a column. just am trying to learn more about this product and offer up suggestions. thanks.