• Having problems with video with Segment PRO on a new PC? You could be experiencing one (or both) of two problems. First, if you have an ultra high-resolution screen, the recommended settings might be higher than 1920 x 1080 with a scale factor of more than 100% and the user interfaces for all software written in c# will NOT be correct. Simply change the resolution and scaling to 1920 x 1080 and scale to 100%. Second, if you have a wonky Bowl View, you have an Intel Iris graphics solution and there are serious problems with it. Solution - go to the Drivers page at Intel's website and install their latest driver for your computer. This will fix it. Link: https://www.intel.com/content/www/us/en/download-center/home.html
Ken Sherwin
Reaction score
26

Profile posts Latest activity Postings Media About

  • Making a new sled for cutting segments. Could you send a photo of your DRO setup so i can include it with my new sled?
    Ken Sherwin
    Ken Sherwin
    I just now saw this. My DRO is just the standard Wixey DRO for table saws. It reads the distance from the blade to the stop mounted on my fence. Therefore, it reads 3.6%long sor degment edge length for 12-segment rings because COS(15 deg) = .966.

    My stop is just a block of wood bolted to the fence.

    What would you like a pic of?
    Ken Sherwin
    Ken Sherwin
    My old sled is the straight out of Jerry Bennett's videos and my new sled replaced the arced slots with a piece of t-track. Nothing special about them at all.
    A
    Hi Ken when did you get here? Is this the place where you learned everything?

    Arlin
  • Loading…
  • Loading…
  • Loading…
  • Loading…
Top