D
David Baldrich
Guest
Does any one have a good idea on how to extend the plunger so it can be used to glue up vessels taller than 10 in. My current thought is to thread a section of pvc pipe and screw it to the treads on top.
Title: Relatively Inexpensive Fix to the Stomper's Flexing
Thank you both. First the link did work and I will study it as it may solve my problem.
Second I had thought about making pieces as an upper and lower half and finishing the insides before glue up to make finishing the inside of tall vessels easier if the vessel is narrower at the top . I will probably try that before getting too inventive.
Thank you . I think they would be perfect as they are 6 in. lengths .If you go to Amazon and search for ‘sprinkler riser extension’, you’ll find just what you’re looking for. They come in a four pack and just thread on to the existing riser.
Lloyd