Len Estrada
PRO Member
Just finished my first two bowls and am ready to learn about open segment projects. My Stomper with SegEasy plates are the aids that add order to this complex process. So I downloaded WoodturnerPro this past week end and found it will be a strong tool in my bag. I have a lot to learn.
It does offer a challenge when finishing a WTP plan and then finding that it has to be altered to use with SegEasy plates for miter angles and no support for putting the ring onto the bowl. I used my SE12-8 to make a solid segment bowl. The path is not very clear to use my SE16-6 to complete the open plan that was very straight forward.
I plan to continue my learning curve and look forward to the improvements that should be made. Len Estrada
It does offer a challenge when finishing a WTP plan and then finding that it has to be altered to use with SegEasy plates for miter angles and no support for putting the ring onto the bowl. I used my SE12-8 to make a solid segment bowl. The path is not very clear to use my SE16-6 to complete the open plan that was very straight forward.
I plan to continue my learning curve and look forward to the improvements that should be made. Len Estrada