J
Justin
Guest
Hey guys, I would love to hear your strategies for flattening your rings as you assemble an open segment bowl. In the past, I've tried putting a few rows on at a time, but errors add up over a few layers. Do you guys flatten each ring after you glue on the segments? How long do you wait after you put the last piece on? What tools do you use to flatten them?
On the vase I'm doing now, I planned for .25" thick rows. I cut the segment stock at .28, so I have a fair amount to take off each ring to get down to .25. Right now I'm using a flattening stick with sandpaper.
Again, I'd love to hear how you guys tackle your open segment bowls!
Thanks,
Justin
On the vase I'm doing now, I planned for .25" thick rows. I cut the segment stock at .28, so I have a fair amount to take off each ring to get down to .25. Right now I'm using a flattening stick with sandpaper.
Again, I'd love to hear how you guys tackle your open segment bowls!
Thanks,
Justin