• Are you looking for a coupon code to buy my software? You can get one from lots of 3rd party sites but they won't work. My software never goes on sale and has never been discounted. The only coupon codes that are given is when I give a club presentation and I offer a discount to the attendees. Other than that, everyone pays the same price.

Search results

  1. Third_Son

    Trying to solve the conundrum of ring size vs segment size

    I stopped overbuilding my blanks. I find it more fun to get as close as I can to the final form. I save a lot of valuable timber that way.
  2. Third_Son

    Trying to solve the conundrum of ring size vs segment size

    That was it! Thanks Mike...I was a chemist for 38 years. Decimal inches have no appeal to me :) I guess it shows I have to pay better attention to my output.
  3. Third_Son

    Trying to solve the conundrum of ring size vs segment size

    Just a quick question to ask why in the generated plan below row rows 6 and 7 show the same segment edge length even though row 7 is clearly larger? Am I doing something wrong? I caught the error in time and made row 7 larger since I wanted the edge to flair out.
  4. Third_Son

    WTP defaults

    I am not taking it personally Lloyd. I have a thicker skin than that. As a relatively new user I just thought that I would share some observations. I will go quietly back to where I was and not bother you or Mike again. Thank you.
  5. Third_Son

    WTP defaults

    Yes I do know how to do the operations that you mentioned. I am not trying my be difficult here. I am just offering some input. I use the programs regularly and am quite happy with the results. I was just offering my observations. Sorry if it came off as something else.
  6. Third_Son

    WTP defaults

    Since I just recently purchased the program, I would be hard pressed to buy an upgrade already. When was the last upgrade? I have mentioned some things that I find the program lacking. I find it very useful. I just thinks some minor changes can really make it much better. Just my 2¢
  7. Third_Son

    WTP defaults

    Hi All, Is there any way to have woodturner pro default to 16 or 24 segments when it opens? I keep getting 12 when importing from 3DP and it starts out with 12 segments per row when I open directly. Sometimes when I go through and change them to 16 I sometimes miss one and have to go back to...
  8. Third_Son

    3D Design Pro-->WTP-->Segment Pro

    I just purchased the full software suite. Thanks for the 30 day trial. It was very helpful.
  9. Third_Son

    Summary worksheet question

    That would work for me Mike...I did mine in photoshop. Thanks.
  10. Third_Son

    Summary worksheet question

    Hi Lloyd, Thanks for the reply. Yes I understand that the shown design is flawed but the point of the conversation was to discuss if both the spreadsheet and the figure could be incorporated somehow and I am just not seeing it. I wasn't asking you to write more code :-). I wasn't going to...
  11. Third_Son

    Summary worksheet question

    Hi, I have been thoroughly evaluating all of the programs in the 30 day trial and have been impressed so far. In WTP is it possible to generate a summary worksheet like the attachment below? It seems like an easier way for me to look at a profile and compare quickly to the segment summary...
  12. Third_Son

    Can I proportionally scale a vessel in Segment Pro?

    Thanks...I got my head around it now
  13. Third_Son

    Can I proportionally scale a vessel in Segment Pro?

    Hi All, I would like to be able to retrieve a profile from Segment Pro and scale the vessel proportionally if possible. Can this be done? All I can find is that I can change the diameter. I would also like to change the height as well (which would mean that I may need to scale the thickness or...
  14. Third_Son

    3D Design Pro-->WTP-->Segment Pro

    Thanks Mike and Lloyd for a clear and detailed explanation.
  15. Third_Son

    3D Design Pro-->WTP-->Segment Pro

    Is the above workflow possible? It would be nice to find a shape, import into 3D DP, transfer this design to WTP and then bring the finished dimensions into Segment Pro to see how feature rings etc. look with the design. Any way to do this?
  16. Third_Son

    Lamination Pro with personal designs

    Thanks Lloyd and Mike...I played with it a bit and figured out how to manipulate the jpg files to get what I was looking for. It is always nice to see how the pattern looks in the vessel itself. Another question. Is it possible to emulate how the turned vessel will look in your program?
  17. Third_Son

    Lamination Pro with personal designs

    Thanks...I will give it a try...
  18. Third_Son

    Lamination Pro with personal designs

    Thanks Lloyd, That seems to be the only solution for me.
  19. Third_Son

    Lamination Pro with personal designs

    Say I wanted to make the feature ring below (one of my bowls). Can I build a pattern like this in Lamination Pro?
  20. Third_Son

    Lamination Pro with personal designs

    Hi all, Is it possible to use Lamination Pro to build a feature ring of your own personal design? I am only finding the baked in chevron, SW themes etc. can be used in this program. I wanted to make my own feature ring designs and see how they look in a finished vessel. Any ideas?
Back
Top