Oeistein
PRO Member
Hi all. This Norwegian Flag Sierra Pen is a kind of segmented turning. The pen was made as a surprise to a second cousin of mine in Saskachewan in Canada. I asked Kallenshaan Woods if they could make me this laser cut pen blanks. They said Yes to that question, but I had to order 10 blanks. The segments is glued direcly on the tube with epoxy and set to cure overnight. After turning the blank is sealed with medium CA for to protect the Holly to be blooded with the blue and red wood under sanding. Sanded to 6K with MicroMesh and then given four layers of thin CA.
Last edited: