Tony Forsyth
PRO Member
Hi All,
I am getting ready to start cutting my first segments using the summary sheet in Segment Pro and need to question the board lengths. I have the software set to metric (mm) But when I multiply the S.E.L. by the qty of segments (24) the summary board length is shorter than actually required.
For example the summary shows a board length for row 2 as 728.7 and a S.E.L. of 33.8 with 24 segments required. So 24 x 33.8 = 811.2 which is 82.5 less than what is required. This repeats for all the lower numbered rows but starts to come good the further down the rows I go.
Am I missing something.
Thanks
Tony
I am getting ready to start cutting my first segments using the summary sheet in Segment Pro and need to question the board lengths. I have the software set to metric (mm) But when I multiply the S.E.L. by the qty of segments (24) the summary board length is shorter than actually required.
For example the summary shows a board length for row 2 as 728.7 and a S.E.L. of 33.8 with 24 segments required. So 24 x 33.8 = 811.2 which is 82.5 less than what is required. This repeats for all the lower numbered rows but starts to come good the further down the rows I go.
Am I missing something.
Thanks
Tony