Richard Bruce
PRO Member
I have noticed when cutting 8, 12, or 16 segments they all seem to go together good and glue up without any small gaps. Some times when I do 18-30 segments I wind up with a small gap between at least two segments and sometimes more. I triple check my lengths and my angles. What are some things I need to check for? I have made sure my blade is at 90 degree's to the table. I number each segment but still get a small gap about a 1/16th to 1/8 sometimes at the top and sometimes at the bottom. I have to assemble to halves and then sand the ends down till they fit correctly, is this the best way to do it or is there something else I should try? Thanks for the help