Here is the WTP file. I really appreciate your time and effort. If it takes up too much of your time, I won't be to hard for me to muscle through the project. This is my first full project with WTP and I am just trying to figure things out and double checking my process.
Thanks,
Tom
Thanks Tom. It really helps to have the project file. It is going to be a nice project.
I have attached your WTP file with some changes that I made. I gave it a different name.
In WTP in the Row Details (Species) is where you can set the default species for that row. By default Ash is the species. There is no need to paint individual segments if the row is the same species. Just use the dropdown list and select the species. For example, Row 1 and 15 are Wenge. Select row 1 so it has a blue box around the ring (Double click left button on mouse) and then select the species (Wenge).
If you wanted to have every other segment maple you can select a segment on the row (red box will outline the segment). then right click for a pop up window with a list of available species. Check to make sure the paint repeat per row is selected and the number of repeats is correct.
Uncheck the repeat per row if you only want to paint the individual selected segment.
With the changes I made using the row detail the summary list now shows row 1 and 15 as wenge, row 12 as featured ring and the rest is listed as yellow heart.
I noticed you had walnut spacers for the featured ring row 12. WTP will not list the spacers in the summary table.
As it will not list the wood you used in Lamination Pro to create the diamond.
If you have LP and WTP running at the same time on your PC. and in LP you export the image (species) to WTP it will do that automatically. In LP when you select direct to WTP you will also have the option to add the instructions from LP in the WTP supporting files section (right side)