I'm trying to design a somewhat simple pattern with a 20 piece ring 10 segments larger with 10 smaller segments, then the next ring would be the same but could offset so the rings result in what I would call a blocked zig zag pattern. I can get close with open segments using the open spaces as the second set of 10 segments. I thought I could just do and "extra ring" to provide info for the segments in the spaces, but you cannot change the degrees for the spaces. The problem is you cannot change the offset of the rings to show the pattern and it will not show the open segments in the plan summary or the type of wood. So the only way I can think to do this is to do two open segment rings half the ring with the bowl plan then create a new plan just for the segments that would fill the open spaces. Then I would have the plan summary to cut the segements.
Any other ideas?
Any other ideas?