• Are you looking for a coupon code to buy my software? You can get one from lots of 3rd party sites but they won't work. My software never goes on sale and has never been discounted. The only coupon codes that are given is when I give a club presentation and I offer a discount to the attendees. Other than that, everyone pays the same price.

Search results

  1. Platter

    Platter

    Platter turned from a Big Leaf Maple Blank with a little off axis/off center turning. 13.25 inches diameter
    • Bob
    • Media item
    • non-segmented platter
    • Comments: 0
    • Category: Non-Segmented Turnings
  2. Stacked Wood Example

    Stacked Wood Example

    Built from the plan found on Woodturner PRO's web site - the feature ring was the one that Lloyd Johnson used for his SketchUp Demo. Walnut & Maple Highlighted with Holly & Ebony
    • Bob
    • Media item
    • bowl segmented sketchup
    • Comments: 0
    • Category: Segmented Turnings
  3. Kevin's Round Bowl

    Kevin's Round Bowl

    Built from a plan found on Woodturner PRO's web site Maple and Walnut
    • Bob
    • Media item
    • bowl segmented
    • Comments: 0
    • Category: Segmented Turnings
  4. Southwest Star Bowl

    Southwest Star Bowl

    Built from Kevin Neelley's design that I purchased from the WoodturnerPro web site. Woods Used: Black Limb and Bloodwood accented by holly and dyed black veneer Dimensions: H: 5-1/4" X W: 7-1/2"
    • Bob
    • Media item
    • bowl segmented
    • Comments: 3
    • Category: Segmented Turnings
  5. Bob

    Indian Blanket

    Jim, I believe the Indian Blanket design that Wayne is referencing is Malcom Tibbetts turning "John's Turning". He shows how to construct the presentation ring in his DVD #2. Although I think I follow Malcom's instructions carefully, my completed projects always have a good deal of room for...
  6. Bob

    Installing on drive other than drive C:

    Lloyd, after re-considering the support headaches that are potentially introduced by installing software on other drives, I decided to re-work my installation. I'll find a way to run Woodturner PRO software from drive C. Bob
  7. Bob

    Installing on drive other than drive C:

    Lloyd, I've had to replace a hard drive and re-install Windows 7. When I came to re-installing 3D Design PRO, Woodturner PRO and Laminaation PRO, the ability to install the software on drive D, seems to have disappeared. Space remains unavailable on my drive C so I need your help to modify the...
  8. Bob

    Tornado Bowl - Open segment beginner project for Stomper/SegEasy

    I've been working on the "tornado bowl" - using the Stomper and the 18-segment plate (my first open segment project). I have two more rings to add to the project but it's time for me to head to the airport to begin a 3-week journey. I'll complete the project after I return. My experience in...
  9. Bob

    Tornado Bowl - Open segment beginner project for Stomper/SegEasy

    Thank you Lloyd. I like that answer. I will post pictures. Bob
  10. Bob

    Tornado Bowl - Open segment beginner project for Stomper/SegEasy

    Lloyd, thank you for posting the Tornado Bowl project. I'm ready to do my first open segment project. I've installed the stomper and have the SegEasy plates. Everything seems simple enough until I go to setup for cutting the segments for Row 2. What?? A Miter Angle of 8.12 degrees? I admit...
  11. Bob

    SketchUp Tutorial - Visualizing feature ring after turning

    Dick, it's good that you've found a process that works for you and I'm sure it would also work for others if we completely undstand the process. I think it's an excellent topic to post as a BLOG. Quoting from the BLOG description "It will automatically be stored in your personal Blog but will...
  12. Bob

    Installing on drive other than drive C:

    I can not find, in the installation procedure, how to direct the installation of the software to a drive other than drive C. I have two static drives. Unfortunately, drive C is the smaller of the two and capacity is running low. How do I direct the software to be installed on drive D? Thanks...
  13. Bob

    Hello from Denton, TX. I'm Bob Loyd.

    I retired (IBM) 9 years ago, began learning woodworking 6 years ago and began doing some turning 4 years ago. Until last year, all of my projects went to family or charity. I attended the segmented symposium in TN in 2010 and then purchased WTP software and DVDs from Malcolm Tibbetts. After...
Back
Top