• Are you looking for a coupon code to buy my software? You can get one from lots of 3rd party sites but they won't work. My software never goes on sale and has never been discounted. The only coupon codes that are given is when I give a club presentation and I offer a discount to the attendees. Other than that, everyone pays the same price.

TomK's latest activity

  • T
    TomK reacted to Doug Drury's post in the thread Off Center with Like Like.
    We had a similar discussion regarding gluing and aligning segments back in Dec 2022 on the segmented turners forum. Scott Gordon's post...
  • T
    TomK replied to the thread Off Center.
    I reallly like that idea. I also have a 3D printer and will be making one.
  • T
    TomK reacted to Donald Lewis's post in the thread Off Center with Like Like.
    I 3d print my own segmenting plates. I can use any gap angle and any number of segments within reason. Even 3D printers have...
  • T
    TomK replied to the thread Off Center.
    Lloyd, Lloyd, Please see the attached picture of what happens to a segment when it is not correctly distanced from the center...
  • T
    TomK replied to the thread Off Center.
    I got tired of the hose clamps for closed segment so I built this fixture. It will accommodate rings up to 10 inches. A #12 stranded...
    • Resized_20240307_162747.jpeg
    • Resized_20240307_170642.jpeg
    • Resized_20240307_170659.jpeg
  • T
    TomK replied to the thread Off Center.
    Should you decide to build a fixture like mine, let me know if you have any questions. More than happy to help
  • T
    TomK replied to the thread Off Center.
    Ok, for example if you wanted to change the open gap from 4 degrees to 3 degrees on segment rows. How would you do that?
  • T
    TomK replied to the thread Off Center.
    Lloyd, Lloyd, Please see the attached picture of what happens to a segment when it is not correctly distanced from the center...
    • Segment Centers.jpg
    • Image 1.jpg
    • Image 2.jpg
    • Image 3.jpg
    • Image 4.jpg
  • T
    TomK replied to the thread Off Center.
    Yes, my question is different. First of all I should mention that I'm doing open segments Using a degree platter controlled by a stepper...
    • Open Segment Fixture.jpg
    • Board widths.png
  • T
    TomK replied to the thread Off Center.
    Sorry for the late reply. For some reason I could not find my post or the replies until today. I now understand why both sides of the...
  • T
    TomK reacted to mfisher's post in the thread Off Center with Like Like.
    MikeS is correct. Here is a diagram of a 8: diameter 12 segment ring. Note the two edges of the segment go to the center. If the...
  • T
    TomK reacted to Donald Lewis's post in the thread Is the Ring View backwards? with Like Like.
    My comment about the application not having the necessary features comes from two points that have come up in this thread. First, when...
Show older items
Back
Top