Stephen Anderson
PRO Member
In Build 3.2.006, how is the number of ring segments set? The are laminate needed values shown on the bottom information display, but what is the default value used to calculate them?
-
Are you looking for a coupon code to buy my software? You can get one from lots of 3rd party sites but they won't work. My software never goes on sale and has never been discounted. The only coupon codes that are given is when I give a club presentation and I offer a discount to the attendees. Other than that, everyone pays the same price.
How to Set Number of Segments
- Thread starter Stephen Anderson
- Start date
Stephen,
Just to the right of the Laminate Wizard button at the left side of the screen is a field labeled Repeating Units. If you want to make a segmented ring that has 10 segments, for example, set the field to 10 repeating units. The lineal laminate will then show you how much you need to make exactly 10 repeating units or how much you need to have a 20% waste allowance. This is unchanged from prior editions of Lamination PRO.
Lloyd
Just to the right of the Laminate Wizard button at the left side of the screen is a field labeled Repeating Units. If you want to make a segmented ring that has 10 segments, for example, set the field to 10 repeating units. The lineal laminate will then show you how much you need to make exactly 10 repeating units or how much you need to have a 20% waste allowance. This is unchanged from prior editions of Lamination PRO.
Lloyd