• Having problems with video with Segment PRO on a new PC? You could be experiencing one (or both) of two problems. First, if you have an ultra high-resolution screen, the recommended settings might be higher than 1920 x 1080 with a scale factor of more than 100% and the user interfaces for all software written in c# will NOT be correct. Simply change the resolution and scaling to 1920 x 1080 and scale to 100%. Second, if you have a wonky Bowl View, you have an Intel Iris graphics solution and there are serious problems with it. Solution - go to the Drivers page at Intel's website and install their latest driver for your computer. This will fix it. Link: https://www.intel.com/content/www/us/en/download-center/home.html

New member here

David Ferry

PRO Member
I'm a woodturner from southern California who makes primarily segmented, stave, dizzy, and bowls-from-boards. I post my work undertake name of Anduril Designs on YouTube. Here is a sample of a bowl-from a board using a laminated section designed on Lamination Pro.

I have a question, Lloyd. Have you designed software for staves?


.IMG_0821.JPG
 

mfisher

Super Moderator
Staff member
I'm a woodturner from southern California who makes primarily segmented, stave, dizzy, and bowls-from-boards. I post my work undertake name of Anduril Designs on YouTube. Here is a sample of a bowl-from a board using a laminated section designed on Lamination Pro.

I have a question, Lloyd. Have you designed software for staves?


.View attachment 4875
Hi David:

WoodTurner Pro has a Stave and Compound ring selection. As well as disk, flat (segmented), open, blank, veneer and wheel.
SP works on a flat segmented ring plan.

Nice work on the bowl you posted.
 
Last edited:
Top