• Are you looking for a coupon code to buy my software? You can get one from lots of 3rd party sites but they won't work. My software never goes on sale and has never been discounted. The only coupon codes that are given is when I give a club presentation and I offer a discount to the attendees. Other than that, everyone pays the same price.

fichier lamination

Y

Yvon

Guest
Bonjour,
j,ai téléchargé les fichiers de modèle Lamination , c,est vraiment génial pour envisager de réaliser des pièces œuvres, merci beaucoup :)
Yvon
 
Translation of Yvon post.
Hello,
I downloaded the Lamination model files, it's really great to consider making works pieces, thank you very much :)
yvon

======================
 
I’m glad you’re enjoying Lamination PRO, Yvon. It’s unfortunate that this software is one of the best-kept secrets for woodworkers. I decided not to market it to the woodworking community since my career outside of Woodturner PRO kept me as busy as I could handle.

Since retiring, I have been volunteering at a local high school woodworking program and the advanced students really took to Lamination PRO. I helped them make a board of thunderbirds like the ones on my ‘Bird Design’ sample and they re-sawed it to a thickness that could be applied to the top of a skateboard. Once their friends saw it, the teacher told me that the demand for his class went through the roof and that I needed to come up with another project for them.

This is my plan for the next project. We’ll start with a Fender Telecaster kit where we’ll plane 1/4” off both the front and the back of the guitar body and make a star surrounded with maple from a radial design. After gluing them to the front and back, we’l use a pattern-maker’s router bit to make the recesses for the electronics and pickups.

It’s actually a pretty simple project and I’m sure the kids will enjoy making a one-of-a-kind guitar as shown in my test build.

Lloyd
 

Attachments

  • B00DB7C6-755E-46B5-820B-28DD86F5B07E.jpeg
    B00DB7C6-755E-46B5-820B-28DD86F5B07E.jpeg
    3.2 MB · Views: 20
Vraiment superbe, je posterai une photo de ma prochaine pièce quand elle sera terminée
Yvon
 
I’m glad you’re enjoying Lamination PRO, Yvon. It’s unfortunate that this software is one of the best-kept secrets for woodworkers. I decided not to market it to the woodworking community since my career outside of Woodturner PRO kept me as busy as I could handle.

Since retiring, I have been volunteering at a local high school woodworking program and the advanced students really took to Lamination PRO. I helped them make a board of thunderbirds like the ones on my ‘Bird Design’ sample and they re-sawed it to a thickness that could be applied to the top of a skateboard. Once their friends saw it, the teacher told me that the demand for his class went through the roof and that I needed to come up with another project for them.

This is my plan for the next project. We’ll start with a Fender Telecaster kit where we’ll plane 1/4” off both the front and the back of the guitar body and make a star surrounded with maple from a radial design. After gluing them to the front and back, we’l use a pattern-maker’s router bit to make the recesses for the electronics and pickups.

It’s actually a pretty simple project and I’m sure the kids will enjoy making a one-of-a-kind guitar as shown in my test build.

Lloyd
Can I join that high school class! Lol
 
Back
Top