• Are you looking for a coupon code to buy my software? You can get one from lots of 3rd party sites but they won't work. My software never goes on sale and has never been discounted. The only coupon codes that are given is when I give a club presentation and I offer a discount to the attendees. Other than that, everyone pays the same price.

Radial segments in Lamination Pro

Can someone explain what radial segmented disks are? Thanks
 
a way to cut the laminate in such a way to form a round disk.
Could be used for bowl bottom, table top, etc.
I guess I need to see a picture to understand how it’s different from a regular segmented ring.
 
I guess I need to see a picture to understand how it’s different from a regular segmented ring.

LP has a help section. Look at the radial segment section. It has some examples of design from the laminate and glued into a disk.
Think of it of having a pattern within the segment. The pattern created from cutting the laminate.

"Radial segments


Radial segments are cut in a manner that the number of segments shown in the Segment Selection Control will create a perfect disc. Pushing the Radial button displays the saw kerf positions on the board currently in the Viewport."

lp1.jpg
 
Last edited:
Ok thanks, that helps. It would be interesting to glue up a board then create a bowl from that board.
 
Attached pdf may be of interest to you.
I have done a couple of bowl from a board. Worked up the bowl design in WTP. Exported the summary sheet and imported into Excel.
Used Excel to figure out which rings could be cut from each blank.

dizzy 1.JPG
 

Attachments

  • BFB_Presentation(1) (1).pdf
    2.9 MB · Views: 20
Back
Top