• Having problems with video with Segment PRO on a new PC? You could be experiencing one (or both) of two problems. First, if you have an ultra high-resolution screen, the recommended settings might be higher than 1920 x 1080 with a scale factor of more than 100% and the user interfaces for all software written in c# will NOT be correct. Simply change the resolution and scaling to 1920 x 1080 and scale to 100%. Second, if you have a wonky Bowl View, you have an Intel Iris graphics solution and there are serious problems with it. Solution - go to the Drivers page at Intel's website and install their latest driver for your computer. This will fix it. Link: https://www.intel.com/content/www/us/en/download-center/home.html

Greetings from Anchorage, Alaska

Kevin McDonald

PRO Member
Hello. I’m Kevin from Anchorage. I’ve dabbled in turning for several years, but now that I am retired, I’m looking forward to getting into segmented turning. I’ve done a couple of pieces and am hooked. Tom Lohman got me pointed in the right direction his gluing jig design and saw stop. Now I’m ready to get serious with the software from Woodturner Pro.


Super Moderator
Staff member
Welcome to WTP forums.
The training vids are very helpful. If you have questions, ask away.
WTP is the older software but gives you control of each ring.
SP is the newer software. Has a great paint feature. It is rules based which limits what you can do with individual rings.