• Are you looking for a coupon code to buy my software? You can get one from lots of 3rd party sites but they won't work. My software never goes on sale and has never been discounted. The only coupon codes that are given is when I give a club presentation and I offer a discount to the attendees. Other than that, everyone pays the same price.

Open Segment Project - Acoma-2

Just finished row #10 down in the shop listening to Janis and working with Jack.
Only thing missing is a cigar.......

20181111_173423.jpg
 
Diameters start getting smaller so it's time to turn the OD profile and diameter to finish size.
We are about as big as I can get on my lathe. :)
20181119_124234.jpg 20181119_124224.jpg
 
Lots of chips flying today, finished OD profile and turned excess out of the ID. Wall down to 9/32" and we are rough sanded inside and out.
20181119_152851.jpg 20181119_152842.jpg
 
Rows 26 - 27 & 28 are on
26.jpg 27.jpg 28.jpg

Now we'll let those dry real good then it's the fun part of turning them on the inside
 
What tool are you going to use to turn them on the inside?
Another amazing piece you are about to finish.
Was this built on your computer driven jig?
 
Starting with the Hunter Tools swan necks, we'll see if I can reach everything.
Yes on the computer driven jig
Also, using wedgie sledge for the open segment pieces, I cut myself a 60 deg open segment wedgie 12% open
 
Rows 25 - 27 & 28 are cut off :mad:
Had a catch and broke a lot of segments.
Rows 25 and 26 are back on and we'll try turning the ID this morning
Wish me luck
 
Last edited:
Back
Top