• Are you looking for a coupon code to buy my software? You can get one from lots of 3rd party sites but they won't work. My software never goes on sale and has never been discounted. The only coupon codes that are given is when I give a club presentation and I offer a discount to the attendees. Other than that, everyone pays the same price.

Search results

  1. R

    Feature ring glue up not going as planned

    I have made two projects with feature rings and neither has gone as planned. In both cases I used lamination pro to design the rings. The software works just fine and the instructions to cut the parts is dead on. It is my belief that the problem arises in the glue up phase and I cannot for the...
  2. R

    Never a dull moment

    After producing one of the tornado globes and liking the result, I thought I would do a tornado bowl. Designed to be an open segment bowl it didn't turn out that way. The original plan called for 9 at 7/16" thick with 18 segs per row and an 18 segment flat segmented ring on top. Of course it had...
  3. R

    Open Segment finishing in two halves

    I had never worked on an open segment form previously and thought I would try the Tornado Globe as per the tutorial. I cut all the pieces then glued up the first half using the SegEasy plate; piece of cake. Put the first half aside then proceeded with the second half. Laying out the the three...
  4. R

    Vessel View seems odd

    Playing with the Tornado Globe project and following along with LLoyd's You Tube video I created the 3d design no problem. I then transferred it to WTP. No problem. I reach the point where I change the view from Cutaway to Vessel View. NOT! The question is - Have I done something wrong...
  5. R

    Inside outside turning layout

    Hi all. I did the sketch up thing for the ornament as per the instruction. The tutorial was great but I have come to the conclusion I am an idiot. For the life of me I cannot actually work the turning out. I made 4 blanks as per the design. On the first blank ,using a template, I marked out what...
  6. R

    New Member From Whitehorse, Yukon Canada

    Hello everyone. Previously I have lived in Montreal, Quebec and Sarnia, Ontario where for 26 years I worked in the petrochemical industry as a process operator ,maintenance supervisor and IT manager. I left that business and returned to college obtaining a computer programmer/systems analyst...
Back
Top