• Having problems with video with Segment PRO on a new PC? You could be experiencing one (or both) of two problems. First, if you have an ultra high-resolution screen, the recommended settings might be higher than 1920 x 1080 with a scale factor of more than 100% and the user interfaces for all software written in c# will NOT be correct. Simply change the resolution and scaling to 1920 x 1080 and scale to 100%. Second, if you have a wonky Bowl View, you have an Intel Iris graphics solution and there are serious problems with it. Solution - go to the Drivers page at Intel's website and install their latest driver for your computer. This will fix it. Link: https://www.intel.com/content/www/us/en/download-center/home.html

Search results

  1. G

    Enlarging/reducing bowl dimensions

    I have (say) a tornado bowl with (say) nine rows and a disk base. If I design a bowl with (say) a top row of diameter 200mm with the design tapering to a base of 100mm. Can I enlarge this design to have a top row of (say) 300mm and the other rows proportional to the original design dimensions...
  2. G

    Design tutorials

    :)Thank you mfisher (Sorry I can't address you by your Christian name) for this kick start especially the cutting procedures. I'm looking forward to seeing how it turns out. The Rockler clamping rails look like a useful addition to my hardware inventory.
  3. G

    Design tutorials

    Where can I find more info on cutting instructions for the southwest design?
  4. G

    Hello from the Antipodes, I'm an old but experienced fogie looking forward to trying a new way...

    Hello from the Antipodes, I'm an old but experienced fogie looking forward to trying a new way to design and make segmented vessels.
Top