• Having problems with video with Segment PRO on a new PC? You could be experiencing one (or both) of two problems. First, if you have an ultra high-resolution screen, the recommended settings might be higher than 1920 x 1080 with a scale factor of more than 100% and the user interfaces for all software written in c# will NOT be correct. Simply change the resolution and scaling to 1920 x 1080 and scale to 100%. Second, if you have a wonky Bowl View, you have an Intel Iris graphics solution and there are serious problems with it. Solution - go to the Drivers page at Intel's website and install their latest driver for your computer. This will fix it. Link: https://www.intel.com/content/www/us/en/download-center/home.html

Search results

  1. R

    Completely “closed” ring

    How would I use segment pro to calculate a ring that is “closed” in the middle? In other words an outer diameter of let’s say “6” and an inner diameter of “0”?
  2. R

    Bandsaw "slicer"

    Nice!
  3. R

    Bandsaw "slicer"

    Jack, Yes, I considered that, but apparently the miter bar on the slicer is an integral part and cannot be replaced by a different size or component per the manufacturer.
  4. R

    Bandsaw "slicer"

    BTW, the MiniMax bandsaw I have is an S45N with a .375 wide miter slot (I see on the Accu Slice website they reference other MiniMax bandsaws - they must have a wider miter slot).
  5. R

    Bandsaw "slicer"

    Arlin, Thanks for posting. I did reach out to John Manura at Accu Slice (inventor) & he indicated there was no interest in providing a tool for a different sized miter gauge slot. Unfortunately, when i purchased the Mini Max I didn't realize the miter slot was not a typical size (I guess...
  6. R

    Bandsaw "slicer"

    Mike, Interesting post. Thank you for sharing. I was interested in the slicer to actually cut rings post glue up. My interest was to cut very thin slices of the completed rings to offset the results in a bowl pattern. Unfortunately, I have a Mini Max S45N which although is a sturdy Bandsaw...
  7. R

    Bandsaw "slicer"

    Thanks. The thread on splitting rings was exactly what I needed to jog the brain! Especially the pictures of jigs.
  8. R

    Bandsaw "slicer"

    Has anyone built a bandsaw jig similar to the accu slicer? I have a Mini Max S45N bandsaw with a unique size miter slot (12.5MM) & the accu slicer is out the question because of the miter slot size. I have some ideas I want to attempt, but thought I would see if anyone here has already...
    • Rick Wize
    • Thread
    • bandsaw jig slicer
    • Replies: 17
    • Forum: Jigs
  9. R

    Wedgie calculation

    Sounds like its very interesting. I can't way to see the project!, But enjoy the time with your wife 1st!!!
  10. R

    Wedgie calculation

    LLoyd, Thanks for the explanation and instructions. Did you actually make the sculpture? If so, how long did it take?
  11. R

    Wedgie calculation

    Thanks Tom, thats exactly what I needed!
  12. R

    Wedgie calculation

    I know this is probably a simple math calculation formula, but I'm stumped (probably has to do with age......). I have several wedgies, I've purchased, but the highest segment number is 48 (3.75 degrees) & I would like to do a wedgie for 60 pieces. I know this would need to be 3 degrees, but...
  13. R

    Open Segment fixture (Manual)

    Thanks Glen, I sent Trevor an email.
  14. R

    Open Segment fixture (Manual)

    Glen, Thanks. I have my own laser & was just hoping to use the file if possible. Rick
  15. R

    Open Segment fixture (Manual)

    Glen, Any chance you can share the Corel Draw file? thanks
  16. R

    Open Segment fixture (Manual)

    Glenn, Did you create the file that was used for the laser? If so how? Thanks
  17. R

    Beta version of Table Saw Sled

    Wayne, great video and excellent idea. In it you refer to a tap you purchased from Harbor Freight - I looked online and could not find the set you referred to. Do you by chance know the model #? Thanks!
  18. R

    Just got my longworth chuck...

    Found it, & just placed an order.
  19. R

    Just got my longworth chuck...

    Lloyd - do you still sell the longworth chuck mentioned in the stomper?
Top