• Are you looking for a coupon code to buy my software? You can get one from lots of 3rd party sites but they won't work. My software never goes on sale and has never been discounted. The only coupon codes that are given is when I give a club presentation and I offer a discount to the attendees. Other than that, everyone pays the same price.

Recent content by Jim Grieco

  1. PXL_20240328_154624667.jpg

    PXL_20240328_154624667.jpg

    Cherry rings with maple & walnut spacers - Walnut rim and floating bottom/base 10" tall and 11" at it's widest
    • Jim Grieco
    • Media item
    • Comments: 0
    • Category: Segmented Turnings
  2. PXL_20240328_153347726.jpg

    PXL_20240328_153347726.jpg

    Maple with coloring 11" tall and 9.5" at it's widest
    • Jim Grieco
    • Media item
    • Comments: 0
    • Category: Segmented Turnings
  3. PXL_20240328_152240256.jpg

    PXL_20240328_152240256.jpg

    Open Segmented Vessel Woods used: Bloodwood, Cherry, Maple, Purpleheart, Sapele, Walnut, Wenge & Yellowheart 9" tall and 9" at it's widest
    • Jim Grieco
    • Media item
    • Comments: 0
    • Category: Open Segment Turnings
  4. PXL_20240328_152413134.jpg

    PXL_20240328_152413134.jpg

    • Jim Grieco
    • Media item
    • Comments: 0
    • Category: Open Segment Turnings
  5. J

    Wood species does not show up in summary

    LOL that is what I did for the rim- used WTP I think I'll keep the gap as is. More concerned about glue surface. Thanks again
  6. J

    Wood species does not show up in summary

    I do have a couple of questions though: How do you change the piece count for the accent (solid) rim in SP? I had to add in my exported summary. Also, does the program adjust the gap degrees based on the design or is it preset to 2 degrees? Thanks again
  7. J

    Wood species does not show up in summary

    Ok I started from scratch with the same original plan. I increased the height of the vessel first and then adjusted the bottom dot. I then checked the summary and it stayed intact with the original paint pattern. I then changed to open segments and changed row height, reset paint and colored as...
  8. J

    Wood species does not show up in summary

    It is a plan designed by someone else using the software and then imported back to my SP.
  9. J

    Wood species does not show up in summary

    It is changing the height of the vessel that is causing this. I checked after every step. I did not change segment count. I changed from closed to open then checked summary. *This plan is already painted I changed row height then checked summary I then changed vessel height and the summary...
  10. J

    Wood species does not show up in summary

    Thanks for the clarification I realize everyone seems to think I changed the number of segments but I did not. This is an existing plan and all I did was change height of vessel, height of rows and closed to open.
  11. J

    Wood species does not show up in summary

    Lloyd - I figured out what causes the summary to not show the species and the disappearance of the base; This happens when I change the height of the vessel. I forgot that I did this also. So, my question now is: how do I change the height of the vessel (using an existing plan) without all this...
  12. J

    Wood species does not show up in summary

    Lloyd - please clarify by what you mean by "resetting segments". Resetting the paint so everything is one color? Resetting from open to closed? Resetting the height of the rows? Thanks
  13. J

    Sled - Wedgie ?

    I have Pete Marken's sled and need to adjust to cut 48 open segments. I know the cut angle is 2.75 for 48 open segs. The plan shows a 2 degree gap. Can I just measure using an angle finder and adjust the sled arms or do I have to make a wedgie? I tried with using the angle finder and just adjust...
  14. J

    Wood species does not show up in summary

    I do not know why this happened. The original *summary shows a disk. *I accidently deleted the column that shows the lengths of each species in each row. Which is why I wanted to reprint. This is when I noticed the problem.
  15. J

    Wood species does not show up in summary

    Thank you Lloyd for the reply. I did not change the number of segments. I only changed to open segmented and raised the row height.
See more
Back
Top