When you are dealt a bunch of Lemons - you make Lemon aide - which is what I named this bowl. It started as a different project - but when I screwed up the turning - I thinned the bottom of the feature ring too much - and it broke through. So at the suggestion of my wife - I sanded back the thin bottom using my drum sander, so that I would have a thicker wall, re-glued it to a couple of new rings and sort of saved a project and a lot of work. The bottom is done as a medallion on Baltic Birch, the rest is Mesquite, yellow heart, blood wood, maple, and a small amount of Ebony. First one that I used the Stomper on. Bowl is approx. 8 inch dia and about 3 1/2 inches high.