• I will be unable to do any shipping of hardware products including Stomper Products and Hunter Products between February 16th and March 20th. Any orders placed during that time will be processed on a first-come, first-served basis. Flash drives will continue to be mailed to US addresses only. I apologize for any inconvenience this will cause.
PXL_20240923_152118587.jpg
Jim Grieco

PXL_20240923_152118587.jpg

*Alternate view
9" h - 9" at its widest
Cherry body with Wenge rim
Feature ring consists of both open and closed 48 segments per row of Bloodwood, Cherry, Maple, Wenge and yellowheart
Thanks Mike! I know the shape is a little wonky - I should have used SP plans instead of just creating with WTP.
I have been playing around with capturing the SP profile image and then bringing it into 3DDP.
From there I can build the wall profile and bring it into WTP.

The current method for me is to use the summary sheet from SP for the Inside/Outside diameter, ring height, number of segment info and just go into WTP and enter those numbers for each ring to build the vessel. From their I can add spacer, etc. In your vessel it would be to make the featured ring open segment and the rest of the vessel closed.
 
I have been playing around with capturing the SP profile image and then bringing it into 3DDP.
From there I can build the wall profile and bring it into WTP.

The current method for me is to use the summary sheet from SP for the Inside/Outside diameter, ring height, number of segment info and just go into WTP and enter those numbers for each ring to build the vessel. From their I can add spacer, etc. In your vessel it would be to make the featured ring open segment and the rest of the vessel closed.
Thanks for the reminder! I have done it this way before but apparently forgot. Haven't dived in to the 3D program yet.
 
Jim.
The more I look at the shape, if it was rotated `180 degrees where the wenge rim was the bottom it would remind me of a SW bowl design.
 

Media information

Category
Segmented Sculptures
Added by
Jim Grieco
Date added
View count
329
Comment count
5
Rating
0.00 star(s) 0 ratings

Image metadata

Device
Google Pixel 3
Aperture
ƒ/1.8
Focal length
4.4 mm
Exposure time
1/841 second(s)
ISO
100
Flash
Off, did not fire
Filename
PXL_20240923_152118587.jpg
File size
1.8 MB
Date taken
Mon, 23 September 2024 8:21 AM
Dimensions
2926px x 3313px

Share this media

Back
Top