Using a design transferred from 3D Designer Pro, I have completed the design in Woodturner Pro, and actually made the bowl. Now I want to use that design as the basis for new, somewhat taller vessel. I can add rings and make rings thicker, but I cannot find a way to get the dotted outline of the vessel walls to go any higher than the original as designed in 3D Design Pro. Isn't there a way to increase the dimensions of the vessel? Thanks!
-
Are you looking for a coupon code to buy my software? You can get one from lots of 3rd party sites but they won't work. My software never goes on sale and has never been discounted. The only coupon codes that are given is when I give a club presentation and I offer a discount to the attendees. Other than that, everyone pays the same price.
Making vessel taller in Woodturner Pro
- Thread starter ldlinford
- Start date
There isn't a current way to make the 3DP profile taller once it is in WTP. As easy as it seems that it should be, it was clear that it was going to be very difficult to do, programming-wise.
The best thing to do is to go back to the design in 3DP and make your changes to it and save it out with a new file name so that your original will be preserved. Then transfer it again to the same file in WTP and specify a taller height. You may have to do this in a couple attempts to get it the way you want it, but it's easy to do and should go quickly.
Sorry I don't have a better answer. It isn't possible to bring the code from 3DP into WTP and so whatever functionality is ported has to be programmed from scratch.
Lloyd
The best thing to do is to go back to the design in 3DP and make your changes to it and save it out with a new file name so that your original will be preserved. Then transfer it again to the same file in WTP and specify a taller height. You may have to do this in a couple attempts to get it the way you want it, but it's easy to do and should go quickly.
Sorry I don't have a better answer. It isn't possible to bring the code from 3DP into WTP and so whatever functionality is ported has to be programmed from scratch.
Lloyd