• Having problems with video with Segment PRO on a new PC? You could be experiencing one (or both) of two problems. First, if you have an ultra high-resolution screen, the recommended settings might be higher than 1920 x 1080 with a scale factor of more than 100% and the user interfaces for all software written in c# will NOT be correct. Simply change the resolution and scaling to 1920 x 1080 and scale to 100%. Second, if you have a wonky Bowl View, you have an Intel Iris graphics solution and there are serious problems with it. Solution - go to the Drivers page at Intel's website and install their latest driver for your computer. This will fix it. Link: https://www.intel.com/content/www/us/en/download-center/home.html

First effort.

Holger

Holger

PRO Member
This is my first attempt at open segmenting. Thought I would share my stomper setup.
I have rails in my work bench so I built my stomper for easy storage. The weight on top is an old base from a floor lamp. Fits perfect on my 1.25 x 8 chucks. The pics are the first row being glued to the base. I only wish I had purchased the larger size setup plate. This one is only 9" in diameter.
 

Attachments

  • 20210322_114026.jpg
    20210322_114026.jpg
    2.7 MB · Views: 11
  • 20210322_113751.jpg
    20210322_113751.jpg
    1.7 MB · Views: 12
  • 20210322_113648.jpg
    20210322_113648.jpg
    1.2 MB · Views: 13
You must log in or register to reply here.
Top