K
Kim Cant
Guest
I am new to segmented turning and am in the process of making my first feature ring bowl. I am a little confused about cutting the laminated board. I am making a feature ring with eight chevrons and have created the laminated board with the chevron pattern. Do I now cut through the board at the mitre angle, or is it better to cut through each segment at right angles and then cut the mitre angle on each segment (i.e. on the table saw or disc sander)? If I cut the angle straight from the board, is there an allowance for the saw kerf in lamination pro? I am concerned that each cut will shorten the SEL of each segment, and the next joint will move up the next chevron. Allen