• Are you looking for a coupon code to buy my software? You can get one from lots of 3rd party sites but they won't work. My software never goes on sale and has never been discounted. The only coupon codes that are given is when I give a club presentation and I offer a discount to the attendees. Other than that, everyone pays the same price.

Another Newbie

Larry C

PRO Member
Hi y'all, I'm an old geezer in Lower Alabama. I've been turning in a somewhat serious manner for the past 17 years. I've done a lot of segmented turning, both open and closed, and decided it's time to lower the bar a bit and get some help on design and layout.
I use the Wedgies and the Sled, and have found so far they will do everything I need....
Looking forward to learning and improving my turning skills...
bWGXJh8NMJt91BnYYgVnhRJK2xIYDZ1gNUxa2D6Ri08sw7lLNAyS9tQrfbNEoEdzzSjO-G1XiU0mhCyOrazC7I-h-W6ARQ0k7SBBmCvSjXNMcLMbyqrL-LCyx9vSrNcDYyxEAjM4NszT0pEPjJAamiC-Sg3Y1XD5_-Pj9iAa-8vpsfZtyt1n1PZQvh7jXHWRBLnPg0uZIx_AMQrCmX5BI8iupKulh3maMJcbgW8hJQhvwYVD_SPBJ7m4UEUXasCIE4TW6vfJDVON3k8wfpk-0HmuQEbcVRAfQz65VUegODGYkTTZ8KpWpA7PV3-syxdOg-0AE8EsHx2LlyTFBpTb3LSvjNLveRsgjXLc7G-GEbjN9P03Tsnc-x_WY_8O1gaTCQaAlFlbpkgFfPmx8048KzWJqkak6rIh2zINppWpBv5hpPrNlsqpaS-vtPZosGieMLuycguFyBQCF9Jkck-AhfmPU9W7FSmlbNCXDgtq7s9LxaQkMYD8lf7OR7joEnp5XI5wt-cdQ67CqNRNuPEUUS3MzG0nZl4xVcbjAE8kOIg_hEGyRtYrlgVc0hB1sut3XZ0mwuiYo605TYdkm7ckKkMEFzRcZE3pqh1YzL_DkM3-6OJxyEUnf7fKCjnIfSMF3LIhSfPUp8ebJycFoCPYCPXmGtMOUy0AX4RiynFUySCzlLTTrDSMdjY=w653-h869-no
 
Very nice vessel. The software is very good at helping in the design phase of a vessel. Take a look at the tutorials. They will explain a great deal on what the software can do. I gave up doing designs on graph paper right after I got Lloyds software. imo, the software is well worth the price.

Ask your questions and provide input. The forum is a great place to learn.
Welcome aboard.
 
Back
Top