• Are you looking for a coupon code to buy my software? You can get one from lots of 3rd party sites but they won't work. My software never goes on sale and has never been discounted. The only coupon codes that are given is when I give a club presentation and I offer a discount to the attendees. Other than that, everyone pays the same price.

Sizes

B

Brian Davis

Guest
Hi how do I change the size eg outside diameter of a bowl in Seg Pro?
 
Two ways start making a new profile, but first specify the bowl height then draw your bowl profile at the diameter you want. Note that the blue squares on the grid where you draw the profile are in one inch increments going out from the center line of the bowl.

The second is if you have a profile you want to tweek the diameter there is a diameter less and more in the lower left hand corner.
 
Thanks mate. I have a profile I wish to reduce in size.
Cant find any diameter tweek button in lower left what does it look like?
 
Oh wow mate thanks
My screen wasn't scrolled down enough couldn't see it Duhhhh
 
Hey thanks mate but got one mire question if I may
I have chosen rings of 13mm and I bowl height of 163 but I am getting 41 rings at a thickness of 3.8mm in the summery any idea why?
upload_2018-4-7_11-53-1.png
 
Don't know?? Try switching to imperial row thickness should then be 0.5" them.
Or try get out of program and then reload.
You have me at a loss.
Looks like one of Tom Lohman's designs I loaded it and played with it and everything seemed fine.
Try changing out of metric.
Then exit the program
Restart the program
reload the plan from scratch, the original you got from Tom
It should be 48 segment, row height 0.15", bowl 5.5" height, 11.212" diameter
If that is all correct, then switch to metric and see what happens
 
Hey thanks mate I did that and it worked again must have been a computer glitch thanks.
 
Two ways start making a new profile, but first specify the bowl height then draw your bowl profile at the diameter you want. Note that the blue squares on the grid where you draw the profile are in one inch increments going out from the center line of the bowl.

The second is if you have a profile you want to tweek the diameter there is a diameter less and more in the lower left hand corner.
Thanks you for help
 
Back
Top