• Are you looking for a coupon code to buy my software? You can get one from lots of 3rd party sites but they won't work. My software never goes on sale and has never been discounted. The only coupon codes that are given is when I give a club presentation and I offer a discount to the attendees. Other than that, everyone pays the same price.

Search results

  1. Brent Dalrymple

    Hollowing with a camera system

    A friend and fellow turner tipped me off that he had abandoned his laser hollowing system for one that uses a camera and a monitor. I did a bit of polking around on the web and found a nice video by Michael Gibson ("Hollowing with a Monitor") on Youtube. So, I took the plunge and bought an...
  2. Brent Dalrymple

    Dyeing Wood for Colored Segments

    I have a bowl designed that will use some colored segments. I couldn't find much information on the internet on dyeing wood (only veneer, but that's thin stuff) so I thought I'd do some experimenting. I bought a 1 gallon vacuum chamber and single-stage vacuum pump. In addition I bought an...
  3. Brent Dalrymple

    Trees

    Here is the plan and a photo of my high-density open segment bowl, "Forest". 96 segments per ring.
  4. Brent Dalrymple

    Open Segment Indexing Fixture

    I had a request to post a picture of my open segment indexing fixture. The first version is shown in P1000955. The white, 12" indexing graph is glued to a 1/8" acrylic disk, and is changeable using two screws with threaded inserts in the 1/2" MDF mounting plate. The graph was made using Title...
  5. Brent Dalrymple

    Wedgie Sled

    I got interested in Jerry Bennett's Wedgie Sled (plans and videos at segeasy.com) so I decided to give it a try. I purchased a Freud 60T thin kerf crosscut blade to minimize "fuzzies" on the cut wedges. I also made an adjustable stop/gauge to govern the width of the outer part of the segments...
  6. Brent Dalrymple

    Digital Thin Rip Jig for Table Saw

    I needed a better thin rip jig to use with the southwestern feature in Lamination Pro, so I designed and built the one shown in the photo and diagram attached. Here are a few notes on construction: 1. This jig is dimensioned for the Jet Supersaw, on which the miter slots are 7 inches from...
  7. Brent Dalrymple

    Stomper Station

    I decided that anything as clever and useful as Lloyd's Segment Stomper with Longworth Centering Jig deserved a place of its own in my shop rather than just a hole in a table or cabinet that was built for some other purpose, so I built a "Stomper Station". It is 15" deep by 18" wide with a 12"...
Back
Top