Search results

I was doing that and kept the same thing. Then I realized that the ring views had to be open in .pdf. Works great now. Brain mishap...LOL Thank you!! Alan

I am trying to get my plan from one pc to another. It sends fine, but when I do, and I open up the "rings" tab, it shows my file, but it is a PDF file. And it only gives me the option to save. How do I get the "Ring" view to open up? It also shows the summery view fine. Where am I going wrong...

Hi Lloyd, I am not sure what I am missing here, but I have tried making my SEL slightly bigger as you suggested, no luck. I have tried changing the RU length with the right and left arrow tab and never did see the design without a red box. I have tried changing the number of segments, didn't...

Hello, I asked this question awhile back and can't find where I saved the answer. In Lamination Pro, under "Vessel View", my feature ring has a red square around each feature ring segment and only shows part of my feature segment. It's like it cut off the right side of my segment. If I...

Hi Lloyd, Thank you for the information. I see the error of my ways now. In WTP, under "Project", it has "Add Photo". Where exactly does the photo get added at? It comes up on my screen when I click add photo, but I can't get it on my plan. It is listed under Project Properties/Supporting Files...

Hi Mike, I have highlighted the row and yes, it highlights the whole row in blue, and still the 16 segment feature ring has several segments highlighted in red. I can click in the bow, the blue line goes away, but red lines stay. I can click on a separate segment, and it highlights in red, but...

I'll try to explain this the best that I can....Why do I have a thin black line between every red line in WTP, when inserting my feature ring? Why the different colored lines? Red vs black. What does each color represent? The 16-segment ring had more red lines The design appears to be centered...

I have tried that several times. That file I was trying to open I can't find again. I found a random one and tried it. That thread is in Segmented Turnings Forum, dated 20Nov2023, titled SEL formula. I click on then file, and instantly the Windows download drop box opens and asks if I want to...

Windows. I have tried again. Open the .json file, 2024-7-12-18-39-26.json, it saves it to Windows. If I try to open it from there, it wants me to choose a program. I close that drop-down box. I open SP, go to Share/Import, click on the file I want to open, it says "Plan imported successfully"...

This is what I did and the steps I took. I was reading a thread, they had a .json file posted, so I clicked it, saved it, which it did as a .json file. Said file saved successfully. As soon as I save it, the drop-down box asks me what program I want to use to open file, only SP isn't listed...

Yes, I get and understand all that. It tells me that the plan was saved successfully. I open My Documents, then My Segment pro, and there they are, as you said. I click on the .json file to open it, and I get a pop-up that asks me what program I want to use to open said file. I have attached a...

Once I download a .json file and go to the directory where it is at, I click the file and it asks me what program I want to use to open file. Only SP is not an option. So how do I get files open once saved in My Documents/My SP? I can see them there, just can't open them. Thank you.

YES!!! That is what I was looking for! Worked perfectly. Onward through my journey of woodturning/segmentation. Thank you so much for refreshing my ole brain for me!

That wasn't what I was asking. I get how to do that save profile, save plane. Thanks though. But what I don't understand, and can't find a video on it, is how to insert a picture of a bowl in the profile view in SP, then trace the right-side profile of it, then remove/delete the bowl picture and...

I have read and read trying to figure out how to insert an image into SP. After 30 minutes I decided to just ask. I tried using the search bar to no avail. Maybe not using the correct key woods? I managed to get it done one time, simply by mistake. I use the (+/- image) tab, crop and size...

I did change the bowl design a few times, unaware of the issues that it would cause. Now I know. Looking forward to the new update. Thank you for your help.

I have the spacers figured out now. I am still having issues with the summary showing the same species, even though in Paint, it shows different species. I have attached a .json file for you to check over.

In SP, when I have my species picked out, design a bowl, then go back to summary, it lists everything as the same species. No matter how many different species I use in my bowl, in summary view it always shows just one species. I am sure it is a simple click here or there, but dang it if I can...

Thank you very much for the information!

In SP, why can I see my vertical spacers in feature Ring view, but not in painted segment view? Also where do I change spacer specie at? I managed to get there once before but can't remember how I got there. :rolleyes: And how critical is it to get spacer grain orientation direction the same as...