• Having problems with video with Segment PRO on a new PC? You could be experiencing one (or both) of two problems. First, if you have an ultra high-resolution screen, the recommended settings might be higher than 1920 x 1080 with a scale factor of more than 100% and the user interfaces for all software written in c# will NOT be correct. Simply change the resolution and scaling to 1920 x 1080 and scale to 100%. Second, if you have a wonky Bowl View, you have an Intel Iris graphics solution and there are serious problems with it. Solution - go to the Drivers page at Intel's website and install their latest driver for your computer. This will fix it. Link: https://www.intel.com/content/www/us/en/download-center/home.html

Search results

  1. vrbradley

    floating bottom for segmenter vessel

    Thanks, Have you seen a video showing how to design this with Woodturner pro...?
  2. vrbradley

    floating bottom for segmenter vessel

    Does anyone have an opinion about a floating base? is it worth the trouble to do? Brad
  3. vrbradley

    Star for floating bottom

    Does anyone know where I can find the video Lloyd posted showing how to make the star? Thanks! Brad
  4. vrbradley

    I seem to remember a video where you told about creating a five point star?

    I seem to remember a video where you told about creating a five point star?
  5. vrbradley

    Stave

    Thanks, I'll check it out.. I would like them to be long but I'm concerned about gluing and grain direction..but being flat is important too.
  6. vrbradley

    Saw-Stop

    This is a kool idea, can you explain the zero process..
  7. vrbradley

    Stave

    Thanks, I found It and it's coming back to me. Now I remember a problem I had, once it is glued up, the to and bottom are not flat?
  8. vrbradley

    Stave vs compound

    can you advise me how to determine demensions and angles using woodturner pro, ive done it but it has been so long i cant seem to make it work?
  9. vrbradley

    Stave

    Its been so long i Forgot how to design a vessel using stave construction, anyone have a hint to get me started? thanks, Brad
  10. vrbradley

    Wedgie Sled

    One of the premier discoveries I have made, thanks to Jerry for sharing.
  11. vrbradley

    Looking for info on cutting 5 pointed star "Dallas Cowboy star"

    I haven't tried y.et but am wondering if a 8-10-12 point star is possible? The laser light for alignment and the hot glue stop were a great help. Thanks for the ideas.
  12. vrbradley

    Looking for info on cutting 5 pointed star "Dallas Cowboy star"

    Just completed my first five point star using Lloyd's example. got lots of practicing to do.
  13. vrbradley

    Looking for info on cutting 5 pointed star "Dallas Cowboy star"

    After using Lloyd's method with lamination pro this is what I get. Cananyone tell me if this looks correct?
  14. vrbradley

    Looking for info on cutting 5 pointed star "Dallas Cowboy star"

    Lloyd, after making the chevron board, I'm not understanding how to make the next cut. Can you give me some guidance?
  15. vrbradley

    tornado globe

    The value of a good "cut" is realized when you try turning one of these, and speed is truly your friend, thanks for the kind words. Brad
  16. vrbradley

    tornado globe

    Well, I finished the Tornado globe project. The results were not exactly as planned, but I did learn a lot in the process. Glue good/turn fast/good sharp tools. Thanks for the project Lloyd Brad
  17. vrbradley

    Tornado Globe Part 2 - Cutting Segments using a Miter Saw

    Thanks Lloyd, I had planned on going to San Antonio, but my wife and I had a conflict we couldn't resolve. Maybe next year. Thanks for your response which reinforces what I thought. After trying to cut the small segments for the ornament using my dubby, I thought it might be wise to make a...
  18. vrbradley

    Tornado Globe Part 2 - Cutting Segments using a Miter Saw

    Lloyd, I'm interested in how you cut the segments for the tornado globe? Table saw? If so do you use the Dubby? Would like to know exactly how you manage it if you do? Brad
  19. vrbradley

    Tornado Globe Part 2 - Cutting Segments using a Miter Saw

    My first test cut in prep to use the seg easy.
  20. vrbradley

    Tornado Globe Part 2 - Cutting Segments using a Miter Saw

    Lloyd, I just followed your example through on the tornado globe. It all looked like it worked out fine when I built my plan in Woodturner Pro. Then I watched the tutorial video again and noticed your plan shows 16 segments?(A,B1,B2 and C shows 32 segments? This confuses me, seems to me there...
Top