• Having problems with video with Segment PRO on a new PC? You could be experiencing one (or both) of two problems. First, if you have an ultra high-resolution screen, the recommended settings might be higher than 1920 x 1080 with a scale factor of more than 100% and the user interfaces for all software written in c# will NOT be correct. Simply change the resolution and scaling to 1920 x 1080 and scale to 100%. Second, if you have a wonky Bowl View, you have an Intel Iris graphics solution and there are serious problems with it. Solution - go to the Drivers page at Intel's website and install their latest driver for your computer. This will fix it. Link: https://www.intel.com/content/www/us/en/download-center/home.html

Search results

  1. 370222506_6731751363557285_5624050463422993410_n.jpg


    16.0 x 6.5 inches. 2052 pieces. Made with maple, wenge, bloodwood, and yellow heart.
  2. Holger

    Comment by 'Holger' in media '20230424_122442.jpg'

    Ended up taking 2nd place at the Orange County, Ca County fair with this piece. Segmented Polychromatic Division. First time entering a county fair.
  3. Holger

    Comment by 'Holger' in media '20230424_122442.jpg'

    Ended up tacking 2nd place at the Orange County Fair, California with this piece. This was my first time entering the wood turning competition.
  4. 20230718_114327.jpg


    Took a while to finish this project due to the heat in my shop.(garage) 12.0 x 9.5 inches. 72 pieces per ring with 33 rings for a total of 2376 pieces. Made with maple, walnut, and bloodwood.
  5. 20230718_115325.jpg


  6. 20230424_122442.jpg


    Finally completed the 12.5 x 13.0 inch segmented hollow form with 2008 pieces. Woods used include wenge, bloodwood, yellow heart, and sycamore. Finished with General Finishes Enduro Clear Poly.
  7. 20230424_124505.jpg


  8. 20230424_124427.jpg


  9. Holger

    Comment by 'Holger' in media '20230213_153110.jpg'

    Thanks for your help today Lloyd. Always enjoy talking with you. Enjoy your trip.
  10. 20230213_152953.jpg


    10" X 8" Open Segmented Bowl. 1440 pieces of maple, bloodwood, walnut, yellow heart, and wenge. It has taken just short of 8 weeks to complete but I'm very pleased with the end result.
  11. 20230213_152744.jpg


  12. 20230213_153110.jpg


  13. 20230109_104359.jpg


    10" x 9" Segmented hollow form with a stave construction tumbling block feature ring. Made with approx. 972 pieces of wenge, walnut, and maple.
  14. 20230109_104532.jpg


    10" x 9" Segmented hollow form with a stave construction tumbling block feature ring. Made with approx. 972 pieces of wenge, walnut, and maple.
  15. Holger

    Comment by 'Holger' in media '20221114_170615.jpg'

    Thanks Lloyd glad you like it. Just one problem the photo you posted to Segmented Woodturners is not my piece. Unless I am looking at the wrong place.
  16. 20221114_170615.jpg


    18.75 X 3.0 inch 3D optical illusion bowl. Made with wenge, maple, walnut, and mahogany.
  17. 20221114_170859.jpg


  18. 20221010_140406.jpg


    My latest 3D optical allusion bowl. 12.5 x 3.0 inches. Made with wenge, oak, bloodwood, walnut, and a little maple in the accent ring.
  19. 20221010_140820.jpg


  20. bowl1.jpg