• Are you looking for a coupon code to buy my software? You can get one from lots of 3rd party sites but they won't work. My software never goes on sale and has never been discounted. The only coupon codes that are given is when I give a club presentation and I offer a discount to the attendees. Other than that, everyone pays the same price.

Recent content by Rick Wize

  1. R

    Completely “closed” ring

    How would I use segment pro to calculate a ring that is “closed” in the middle? In other words an outer diameter of let’s say “6” and an inner diameter of “0”?
  2. R

    Bandsaw "slicer"

    Nice!
  3. R

    Bandsaw "slicer"

    Jack, Yes, I considered that, but apparently the miter bar on the slicer is an integral part and cannot be replaced by a different size or component per the manufacturer.
  4. R

    Bandsaw "slicer"

    BTW, the MiniMax bandsaw I have is an S45N with a .375 wide miter slot (I see on the Accu Slice website they reference other MiniMax bandsaws - they must have a wider miter slot).
  5. R

    Bandsaw "slicer"

    Arlin, Thanks for posting. I did reach out to John Manura at Accu Slice (inventor) & he indicated there was no interest in providing a tool for a different sized miter gauge slot. Unfortunately, when i purchased the Mini Max I didn't realize the miter slot was not a typical size (I guess...
  6. R

    Bandsaw "slicer"

    Mike, Interesting post. Thank you for sharing. I was interested in the slicer to actually cut rings post glue up. My interest was to cut very thin slices of the completed rings to offset the results in a bowl pattern. Unfortunately, I have a Mini Max S45N which although is a sturdy Bandsaw...
  7. R

    Bandsaw "slicer"

    Thanks. The thread on splitting rings was exactly what I needed to jog the brain! Especially the pictures of jigs.
  8. R

    Bandsaw "slicer"

    Has anyone built a bandsaw jig similar to the accu slicer? I have a Mini Max S45N bandsaw with a unique size miter slot (12.5MM) & the accu slicer is out the question because of the miter slot size. I have some ideas I want to attempt, but thought I would see if anyone here has already...
  9. R

    Wedgie calculation

    Sounds like its very interesting. I can't way to see the project!, But enjoy the time with your wife 1st!!!
  10. R

    Wedgie calculation

    LLoyd, Thanks for the explanation and instructions. Did you actually make the sculpture? If so, how long did it take?
  11. R

    Wedgie calculation

    Thanks Tom, thats exactly what I needed!
  12. R

    Wedgie calculation

    I know this is probably a simple math calculation formula, but I'm stumped (probably has to do with age......). I have several wedgies, I've purchased, but the highest segment number is 48 (3.75 degrees) & I would like to do a wedgie for 60 pieces. I know this would need to be 3 degrees, but...
  13. R

    Open Segment fixture (Manual)

    Thanks Glen, I sent Trevor an email.
  14. R

    Open Segment fixture (Manual)

    Glen, Thanks. I have my own laser & was just hoping to use the file if possible. Rick
  15. R

    Open Segment fixture (Manual)

    Glen, Any chance you can share the Corel Draw file? thanks
Back
Top