Recent content by Mike Goldfine

  1. Mike Goldfine

    Thickness

    A 1/4" thick wall is about right on larger turnings. When I started turning about 22 years ago many turners were going for 1/8" or thinner, but I think it's nice to have a little more weight for durability in case it gets dropped or knocked around and also to help prevent it shattering in case...
  2. Mike Goldfine

    Second Self Designed Segmented Bowl

    Nice going Don. For those thin rings you might consider doing them in double thickness whenever feasible and then splitting them to make for easier glue-ups.
  3. Mike Goldfine

    Segment Pro vs Woodturner Pro

    That is what I did Mike, first using SP to get the design and then redoing it in WP. I can see that SP would be the best program where the design pretty much covers the whole turning. I agree that using both programs for one design can be a useful strategy.
  4. Mike Goldfine

    Segment Pro vs Woodturner Pro

    After designing a few vessels with Segment Pro it seems to me that Woodturner Pro allows more flexibility and user friendliness A vessel designed in WP can contain rings with different numbers of segments. In that way, high count segment rings can be placed where you want to create detailed...
  5. Mike Goldfine

    Segment pro/ species not included on summary sheet

    Yes, it was an issue with the problem plan. I'll do as you suggest. Again thanks for your help.
  6. Mike Goldfine

    Segment pro/ species not included on summary sheet

    Thanks to both mfisher and lloyd for your help and explanations. This should keep me out of trouble, for the time being at least. The only other sticky issue I'm having is that after saving the plan, when I reopen it is different than what I saved, including extra rings and changed height and...
  7. Mike Goldfine

    Segment pro/ species not included on summary sheet

    I had changed the species combos on this bowl 2 or 3 times. I did get the correct species columns on one of the iterations, but I don't know how I did it. Then after the next species change it disappeared again. I was using my default species for the painting.
  8. Swirl bowl

    Swirl bowl

    My first hardwood segmented turning. Purpleheart and Beech, about 6.5 inches Height and width and 720 segments. I experienced some challenges with this turning due to skimping on my ring widths. I will not make that mistake again! Altogether a great learning experience.
  9. Mike Goldfine

    Segment pro/ species not included on summary sheet

    Thanks, I will give it a try tomorrow (Norway time difference).
  10. Mike Goldfine

    Segment pro/ species not included on summary sheet

    Thanks for the reply. I'm not sure how to send the file to you. When I export it to my document file it converts to a PDF file which wasn't accepted by Acrobat reader as something is corrupted about the file. can I just send you an email with screen shots instead? I will need an email account to...
  11. Mike Goldfine

    Segment pro/ species not included on summary sheet

    I have painted a design using 3 different species, yet only one species is shown on the summary. Can you let me know how I can fix this?
  12. Mike Goldfine

    Bandsaw "slicer"

    Rick, I have sliced the rings seen in the photos above to use them on a practice project. I had to slice the usable part to slightly more than 3/16" (5.5mm), which left a waste ring slightly more than 1/16" (2mm). I did this by sticking the ring to a board with double sided tape and the ring at...
  13. Mike Goldfine

    barley twist vase

    I'm getting started a bit slow because I had a heart attack a couple of weeks ago and the doctor said I couldn't do anything for awhile. I hope to start a project that's already planned later this week. It might have some scroll saw inlay incorporated, but I'm not sure how it would look with...
  14. Mike Goldfine

    Open Segment Project - Maze

    Great work on this Bob. Really beautiful shape, pattern and color combinations. Are you suffering from postpartum depression?
Top