• Are you looking for a coupon code to buy my software? You can get one from lots of 3rd party sites but they won't work. My software never goes on sale and has never been discounted. The only coupon codes that are given is when I give a club presentation and I offer a discount to the attendees. Other than that, everyone pays the same price.
Pot with inlays
Jan Conradie

Pot with inlays

The pot has a diameter of 195 mm and a height of 185 mm. It consists of two cones of 12 staves of African Wild Pear (top and bottom) and a midsection of 12 segments of African Wild Pear. Each segment is separated by a 2 mm thick Imbuia board. The dark top and bottom parts are made of solid Imbuia. Half-round cuts were made in every second segment of the middle ring to a depth of 5mm with a halfround bullnose router (9.5 mm) at and angle of 60° to the axis of rotation of the lathe and a Paduak dowel was glued into position. After drying the process was repeated at 60° in the opposite direction. The router jig described in the “Thread” section of WTP was used for this operation and was made by Dereck Nicolson (see Threads)

Media information

Category
Segmented Turnings
Added by
Jan Conradie
Date added
View count
1,731
Comment count
2
Rating
0.00 star(s) 0 ratings

Image metadata

Device
OLYMPUS IMAGING CORP. SP590UZ
Aperture
ƒ/3.5
Focal length
9.2 mm
Exposure time
1/10 second(s)
ISO
125
Flash
Off, did not fire
Filename
P1010255.JPG
File size
90.6 KB
Date taken
Mon, 30 November -0001 12:00 AM
Dimensions
640px x 480px

Share this media

Back
Top